Ignition switch harness

Charging, starting, lighting, gauges, HVAC

Moderators: FORDification, Thunderfoot

Post Reply
User avatar
Ron_Hall
New Member
New Member
Posts: 214
Joined: Sat Oct 22, 2016 2:59 am
Location: Reno, NV

Ignition switch harness

Post by Ron_Hall »

Hi guys! have a quick question, when removing the wiring harness from the back of the Ignition switch, are there any clips holding it or can I just wiggle it towards the rear?

Thanks
Ron
1971 F100 SWB 390 FE - bored.030 over
Edelbrock Performer - Holley 600 CFI
Stock heads with some porting - Sanderson FF427 Headers
C6 with stock converter - 3.25 rear end gears
One owner...
Top
DisneysPatB
Preferred User
Preferred User
Posts: 279
Joined: Wed Feb 08, 2017 7:58 pm
Location: Sunland, CA

Re: Ignition switch harness

Post by DisneysPatB »

https://www.youtube.com/watch?v=DN2bQrCW2iA
1970 F250 460 C6 - Project - Currently not running.
1999 Dodge Durango SLT 4 x 4 5.9 Magnum -not running.
1999 Toyota Corolla - Daily Driver.

https://fordification.com/forum/app.php ... y/album/43
Top
User avatar
Ron_Hall
New Member
New Member
Posts: 214
Joined: Sat Oct 22, 2016 2:59 am
Location: Reno, NV

Re: Ignition switch harness

Post by Ron_Hall »

Thanks for the click bait!!! :nono: :nono:
1971 F100 SWB 390 FE - bored.030 over
Edelbrock Performer - Holley 600 CFI
Stock heads with some porting - Sanderson FF427 Headers
C6 with stock converter - 3.25 rear end gears
One owner...
Top
User avatar
MadMike
New Member
New Member
Posts: 90
Joined: Sun Jan 08, 2017 3:43 am

Re: Ignition switch harness

Post by MadMike »

Unscrew the switch from the dash, pull it down as much as you can, wear some gloves and squeeze the two tabs and wiggle-wiggle-wiggle-wiggle the begesus out of it. If it hasn't been off in quite some time it will be a mother to get off.
-Michael
Top
Thipdar
New Member
New Member
Posts: 84
Joined: Fri Apr 09, 2010 8:26 pm

Re: Ignition switch harness

Post by Thipdar »

My '70 uses the spade lug type of switch, but has no clips to hold the connector in place.
Top
DisneysPatB
Preferred User
Preferred User
Posts: 279
Joined: Wed Feb 08, 2017 7:58 pm
Location: Sunland, CA

Re: Ignition switch harness

Post by DisneysPatB »

Ron_Hall wrote:
Thanks for the click bait!!! :nono: :nono:
No bait, was just telling you to wiggle it(just a little bit). ;)
1970 F250 460 C6 - Project - Currently not running.
1999 Dodge Durango SLT 4 x 4 5.9 Magnum -not running.
1999 Toyota Corolla - Daily Driver.

https://fordification.com/forum/app.php ... y/album/43
Top
User avatar
Ron_Hall
New Member
New Member
Posts: 214
Joined: Sat Oct 22, 2016 2:59 am
Location: Reno, NV

Re: Ignition switch harness

Post by Ron_Hall »

DisneysPatB wrote:
Ron_Hall wrote:
Thanks for the click bait!!! :nono: :nono:
No bait, was just telling you to wiggle it(just a little bit). ;)
Got it, thanks...
1971 F100 SWB 390 FE - bored.030 over
Edelbrock Performer - Holley 600 CFI
Stock heads with some porting - Sanderson FF427 Headers
C6 with stock converter - 3.25 rear end gears
One owner...
Top
User avatar
Ron_Hall
New Member
New Member
Posts: 214
Joined: Sat Oct 22, 2016 2:59 am
Location: Reno, NV

Re: Ignition switch harness

Post by Ron_Hall »

MadMike wrote:Unscrew the switch from the dash, pull it down as much as you can, wear some gloves and squeeze the two tabs and wiggle-wiggle-wiggle-wiggle the begesus out of it. If it hasn't been off in quite some time it will be a mother to get off.
No tabs... just wiggle-wiggle-wiggle-wiggle :D
Thanks
1971 F100 SWB 390 FE - bored.030 over
Edelbrock Performer - Holley 600 CFI
Stock heads with some porting - Sanderson FF427 Headers
C6 with stock converter - 3.25 rear end gears
One owner...
Top
Post Reply

Return to “Electrical & Wiring”