Crossmember
Moderator: FORDification
-
Deadeye
- New Member
- Posts: 4
- Joined: Sat Aug 16, 2014 11:21 am
Crossmember
Hey. I am refurbishing a 1971 F100 Ranger short box. I have to replace the cross-member that runs under the cab between the doors and attaches to the door sills. This is welded to the cab and runs above the frame. Is it possible to buy this cross-member or will I have to have it made? Is there a schematic or blueprint that shows the dimensions ? Any help would be much appreciated. Thanks. Deadeye.
-
sargentrs
- 100% FORDified!
- Posts: 9866
- Joined: Fri Jun 22, 2007 9:30 am
- Location: Georgia, Jasper
Re: Crossmember
Are you talking about this support. Goes from the cab support channel and angles down to the rocker panel. http://www.autobodyspecialt.com/cgi-bin ... ey=CMB-120
Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
-
fordman
- 100% FORDified!
- Posts: 22329
- Joined: Sun Aug 28, 2005 8:17 pm
- Location: Kansas, Ottawa
- Contact:
-
Deadeye
- New Member
- Posts: 4
- Joined: Sat Aug 16, 2014 11:21 am
Re: Crossmember
Thanks for the replies and pics. That is exactly what I was talking about. Glad I found this sight, has answered a lot of questions I've had. Lots reading to do. Thanks again . Deadeye